Filter By:
- Bar Ends (10)
- BMX (19)
- Bottom Brackets (161)
- Brakes/Levers/Pads (471)
- Cables (121)
- Cassettes/Freewheels (124)
- Chainrings (202)
- Chains (88)
- Show More Categories
- Cranksets (219)
- Derailleurs (148)
- Forks (83)
- Groups (11)
- Handlebar Grips/Tape (183)
- Handlebars (124)
- Headsets (110)
- Pedals (175)
- Saddles (199)
- Seatposts (62)
- Shift/Brake Combinations (71)
- Shifters (105)
- Shocks (25)
- Stems (85)
- Misc. (1138)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.50
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.65 - $2.75
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.70
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.00
FSA Mega Exo Small Parts.
$2.00 - $42.00
- Hayes service parts for calipers
- Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
$2.00
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$2.75
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$2.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano E-tube Dummy Plugs
- Extra E-Tube plugs for sealing unused ports on shifters or junction boxes
- Sold each
$3.00
Shimano Front Derailleur Cable Fixing Assembly
$3.26
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Driver Spring - Ratchet EXP
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.47
Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$3.50
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$3.50
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$3.57
Complete remotes and remote components for KS dropper posts.
$3.68
Campagnolo small parts for bottom brackets.
$3.70
Brass hose insert for Hope hydraulic disc brakes.
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.94
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline
$3.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
$3.99 - $99.99
The 611 Ergowave CrMo Saddle was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The chromoly version provides an economic option for those wanting to experience the benefits of the Ergowave. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. And for even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better damping properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs and reduced pressure to the sit bones.
$4.00
FSA Mega Exo Small Parts.
Page 1 of 65
Next page