Cycling Shoes

The Sidi Ergo 4 features Sidi's Tecno 3 buckle system, which uses two different ratcheting dials for a customizable fit across the instep. The Tecno 3 system is low-profile and tidier than Sidi's signature ratcheting buckle, and it also allows for an even greater degree of micro adjustability and fit consistency across the entire shoe. As with all of Sidi's fastening hardware, you can fiddle with the Tecno 3 buckles in the saddle; however, the standard Tecno-3 lacks the Tecno-3 Push's little red release button. The Twelve Carbon Composite Sole is built like the road racing version of a mountaineering boot, with a carbon fiber shank running down the center to keep the shoe's power-transferring heart stiff and responsive. This is encompassed by carbon-reinforced nylon, which provides a bit of engineered flex for comfort and reduces the price compared to Sidi's all-carbon soles. The Ergo 4 also incorporates Sidi's Adjustable Heel Retention Device, which tightens the top of the heel cup to keep your foot positively planted in the shoe. The shoe's tongue and instep strap are both padded generously to allow for supreme comfort with tight buckles. Finally, all of the enclosure hardware and the heel pads are replaceable, so the shoes will outlive multiple seasons and even the occasional crash.

Women's performance indoor SPD cycling shoes with a comfortable fit and maximum breathability. - Breathable, comfortable sock mesh upper designed for hard workouts - Easily open, tighten, and adjust fit with Boa L6 dial - Full-length reinforced plate provides stable power transfer - Full-length rubber sole enhances walking comfort - Women's specific performance DYNALAST for a natural, comfortable fit

Featherweight gravel racing shoes. Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Heel Stabilizer Improves heel hold - Super stiff and lightweight carbon composite sole - System engineered with SPD pedals for maximum pedaling efficiency and stability - Lightweight, abrasion-resistant TPU lugs for the best balance of pedaling performance and off-the-bike capability - Surround upper pattern provides the perfect balance of holding power and absolute all-day comfort - Boa IP1 with dual micro adjustment function

A tough, insulated, waterproof, and comfortable shoe built for riders without an off-season. - Waterproof GORE-TEX Insulated Comfort liner for maximum protection and warmth - Integrated lace shield design with high cuff cover construction - A fleece-lined insole for added insulation and heat retention. - 360-degree reflectivity for high visibility - MICHELIN high-performance, dual-density rubber outsole offers superior traction with unmatched durability, stability, and slip resistance - Torsional midsole “TORBAL” allows natural rider “flow” motion during downhill descents

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

High-performance road endurance shoes for the aspiring women riders. Synthetic Leather Lighter, stronger and more durable than natural leather. Offset Straps Asymmetric straps relieve pressure points. Wider Cleat Adjustment Expands range for mounting cleats. Features - High-density synthetic leather with perforation improves fit and breathability. - Boa L6 dial for quick and precise micro-adjustment - Off-set Strap relieves tension at the highest point of the foot - Lightweight glass fiber reinforced nylon sole for power transfer - Durable, wide heel pads provide walking stability - Women’s specific last for a natural, comfortable fit

Ready to tackle dust, mud, and mixed terrain, the RX600 boasts powerful pedaling performance and confidence inspiring grip in a gravel shoe thoughtfully engineered for bikepacking and adventuring. - Versatile Gravel Shoe: the RX600 is an SPD gravel shoe with optimally balanced stiffness and walkability for off-road exploring - Efficient Pedal Performance: stiff carbon reinforced outsole transfers your efforts directly to the pedal - Bikepacking Friendly: wider outsole offers extra stability when walking or pushing your bike - Tailored Fit: L6 BOA dial closure system cinches in seconds for a secure fit every ride - Cleats sold separately

Ready to tackle dust, mud, and mixed terrain, the RX600 Women's boasts powerful pedaling performance and confidence inspiring grip in a gravel shoe thoughtfully engineered for bikepacking and adventuring. - Versatile Gravel Shoe: the RX600W is a women's SPD gravel shoe with optimally balanced stiffness and walkability for off-road exploring - Efficient Pedal Performance: stiff carbon reinforced outsole transfers your efforts directly to the pedal - Bikepacking Friendly: wider outsole offers extra stability when walking or pushing your bike - Tailored Fit: L6 BOA dial closure system cinches in seconds for a secure fit every ride - Women's Sizing: designed with a women's specific last for a natural, comfortable fit. - Cleats sold separately

FEATHERWEIGHT GRAVEL RACING SHOES AS BOLD AS THEIR RIDER. FEATURES: - Surround-wrapping upper pattern with supple synthetic leather balances holding power and comfort. - Super stiff and lightweight carbon composite sole for high-speed gravel racing. - Low-profile BOA Li2 dials with rubber grip allow quick and precise micro-adjustments. - Lightweight, abrasion-resistant TPU lugs offer balanced pedaling performance and off-the-bike capability. - Vivid inkjet-printed graphics inspire with their bold design. - System engineered with SPD pedals for maximum pedaling efficiency and stability.

Bringing together the top performance features of our premium mountain bike and road racing footwear in a shoe that balances powerful pedaling performance and versatile off-the-bike capability, the RX801 is a featherweight all-terrain gravel shoe that's as bold as its rider. Lightweight, stiff, and walkable, it's the perfect shoe for gravel racers, gran fondo riders, and weekend warriors alike. - Ultralight Gravel Shoe: the RX801 is a breathable racing shoe for adventures on all terrain - Carbon Composite Sole: stiff, lightweight sole optimized for increased power transfer through your pedal stroke - Precise Fit: new BOA Li2 dial adjusts for a secure fit instantly with no pressure points - Tread Confidently: high-grip, scratch-resistant rubber outsole makes walking a breeze - Reinforced Toe: offers extra protection from scuffs and scrapes on more technical terrain - Cleats sold separately

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

XC COMPETITION-LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Ultra-rigid, lightweight carbon fiber reinforced midsole. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

Lightweight, high-performance mid-range XC shoe. Synthetic Leather Lighter, stronger and more durable than natural leathers Reinforced Spike Mount Reinforced spike mount for extreme conditions - Low stack height midsole helps stabilize foot, maximizing power transfer and efficiency - Surround wrapping upper structure reduces overlap, providing a glove-like fit - Mesh/TPU/Synthetic leather composite upper provides a comfortable fit and better breathability - Boa L6 dial for quick and precise micro-adjustment - Glass fiber reinforced midsole for power transfer - Exclusive MICHELIN high-traction, mud-shedding tread pattern outsole - Reinforced spike mount for extreme conditions, 18mm spike option - Women’s specific last for a natural, comfortable fit.

With its seamless leather upper and carbon-insert sole, this women's road cycling shoe rivals other footwear at twice the price. We bonded mesh to the heavily perforated upper in a seamless construction to give the shoe a more comfortable fit. A single L6 BOA closure provides equal pressure across the instep. The heel features a 1cm rise to make walking easier, and the sole is set up to give you the option to use a two-bolt or a three-bolt cleat. Features a women's specific shape and fit. - Bonded Seamless Upper delivers all-day riding comfort, breathability, and durability - L6 Boa system with sequence routing for micro-adjustability and secure, even closure - 1:1 Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8) - BioViz reflective elements for low-light visibility - EVA foam and rubber heel bumper give stability and walking comfort - 3-bolt road cleat & SPD compatible

Everything you need and nothing you don't. We created this women's road cycling shoe with a stiff full nylon sole designed for easy pedaling to reduce foot fatigue. The heavily perforated film upper is bonded to a highly breathable mesh for optimal ventilation. Three supple straps offer a strong closure with easy on-the-fly adjustability. Our 1cm rubber heel bumper makes this shoe an easy walker with either two-bolt or three-bolt cleats. Features a women's specific shape and fit. - Bonded Seamless Upper delivers all-day riding comfort, breathability and durability - Anatomic three-strap design comfortably secures foot and is easy to adjust - 1:1 Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8) - BioViz reflective elements for low-light visibility - EVA foam and rubber heel bumper gives stability and walking comfort - 3-bolt road cleat & SPD compatible

We took the clean, modern aesthetic of our best-selling road shoes and amplified the materials and construction to endure the challenging environment of indoor cycling. The result is a Women's cycling shoe specifically engineered to perform in hot, humid conditions. The versatile sole works with all popular cleat styles to easily connect to your preferred home or studio bike pedals. - Anti-microbial upper mesh to help resist odor-causing bacteria and fungus - Synthetic leather collar lining and closed-cell foam padding helps shed sweat and water - Updated PE sockliner with Silvadur anti-microbial top sheet material for added durability and bacterial resistance - Added ventilation holes in lasting board for enhanced breathability - Compatible with 3-bolt SPD-SL, Delta, and 2-bolt SPD cleats

Pearl Izumi took the clean, modern aesthetic of their best selling road style and amplified the materials and construction to endure the challenging environment of indoor cycling. The result is a cycling shoe specifically engineered to perform in hot, humid conditions. - Anti-microbial upper mesh to help resist odor causing bacteria and fungus - Synthetic leather collar lining and closed cell foam padding helps shed sweat and water - Updated PE sockliner with Silvadur anti-microbial top sheet material for added durability and bacterial resistance - Added ventilation holes in lasting board for enhanced breathability - Weight: 249 g (size 40)

Designed for comfort with or without socks, this summer weight shoe has a fiberglass injected composite shank that delivers power to the pedals, and EVA run shoe foam in the midsole for all-day ride comfort on and off the bike. The quick lace closure system keeps the shoe securely in place, while the mesh-synthetic upper maximizes breathability. - Quick lace closure system gives secure foot in all conditions - Barefoot construction for a comfortable fit with or without socks - Fiberglass injected composite plate for efficient power transfer - Highly breathable mesh/synthetic upper delivers comfort and breathability - EVA foam run shoe midsole for off the bike cushioning and comfort - Carbon rubber lugged outsole for superior traction and durability - SPD compatible

The Lake CX219 Road Shoe offers race level features, fit and performance without sacrificing quality and durability. The CX219 features form-fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure utilizing Carbitex tongue panels for reduced friction lace adjustment. A 100% carbon fiber sole that creates a comfortable, lightweight, and classy package. CX/TX Competition Last—With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole that creates a comfortable, lightweight and classy package. Available in 3 hole cleat pattern. Clarino Microfiber & mesh upper. The CX219 features form fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure utilizing Carbitex tongue panels for reduced friction lace adjustment. Side mounted L6 BOA Push/Pull lacing system.

The Lake CX219 Road Shoe offers race level features, fit and performance without sacrificing quality and durability. The CX219 features form-fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure utilizing Carbitex tongue panels for reduced friction lace adjustment. A 100% carbon fiber sole that creates a comfortable, lightweight, and classy package. CX/TX Competition Last—With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole that creates a comfortable, lightweight and classy package. Available in 3 hole cleat pattern. Clarino Microfiber & mesh upper. The CX219 features form fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure utilizing Carbitex tongue panels for reduced friction lace adjustment. Side mounted L6 BOA Push/Pull lacing system.

The CX242 is a culmination of all of our experience, advanced materials, and shoe making techniques to make a shoe that offers the best fitting solution for hard to fit foot types. Made with a heat moldable heel counter and an uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfort. The CX242 was designed for those riders with foot issues such as bunions, deformation or extremely narrow feet who need a shoe that will not beat their feet up, giving the rider the endurance they need to stay on the bike. The upper has separated panels that allow for fine tuning the pressure and fit which also allows the upper to conform around sensitive and painful spots on the foot without the same level of constraint that is felt in traditional shoe uppers. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole. Available in 3 hole cleat pattern. A 100% carbon fiber sole that creates a comfortable, lightweight and classy package. Fullgrain leather (White/Black and Black/Silver) or Clarino Microfiber (Matte Grey/Black and Reflective Silver/Grey) and NuFoam lining with Carbon fiber support panels, which help to maintain a secure fit while adding foot stability. The upper is segmented into 6 independent zones for the most flexible fit to accommodate narrow or wide feet as well as high instep and low instep feet. The moldable heel counter doubles the heel hold for a secure fit. Carbitex support panels offer additional support to enhance the closure. Dual Side mounted Push/Pull Li2 BOA Fit System with releasable lace guides.

The CX242 is a culmination of all of our experience, advanced materials, and shoe making techniques to make a shoe that offers the best fitting solution for hard to fit foot types. Made with a heat moldable heel counter and an uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfort. The CX242 was designed for those riders with foot issues such as bunions, deformation or extremely narrow feet who need a shoe that will not beat their feet up, giving the rider the endurance they need to stay on the bike. The upper has separated panels that allow for fine tuning the pressure and fit which also allows the upper to conform around sensitive and painful spots on the foot without the same level of constraint that is felt in traditional shoe uppers. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole. Available in 3 hole cleat pattern. A 100% carbon fiber sole that creates a comfortable, lightweight and classy package. Fullgrain leather (White/Black and Black/Silver) or Clarino Microfiber (Matte Grey/Black and Reflective Silver/Grey) and NuFoam lining with Carbon fiber support panels, which help to maintain a secure fit while adding foot stability. The upper is segmented into 6 independent zones for the most flexible fit to accommodate narrow or wide feet as well as high instep and low instep feet. The moldable heel counter doubles the heel hold for a secure fit. Carbitex support panels offer additional support to enhance the closure. Dual Side mounted Push/Pull Li2 BOA Fit System with releasable lace guides.

The Lake MX177 Mountain Shoe offers incredible performance, stability, and all-day comfort in an extremely durable and budget-friendly design. MX Sport Last – This last features a larger, more roomy toe-box than our Comfort last while providing increased foot control through the heel & saddle of the foot. The resulting fit is designed for aggressive riding while remaining comfortable to wear all day. Ideal for couriers, adventure cyclists & anyone else who wears their cycling shoes for long periods of time. MX177 offers incredible performance, stability, and all-day comfort. Feature for feature no other shoe can be compared to the MX177 in the same category. Outsole: Supergrip Enduro Sole with Ice Lock anti-slip lug inserts. What really makes the MX177 stand out is its amazing Fiberglass injected nylon sole. Lake's nylon sole is world famous for its uncompromising comfort and performance. No other injected nylon sole offers the same level of stiffness or comfort. Combined with a real rubber sole, the MX177 is one of the most versatile cycling shoes available. Upper: Clarino Microfiber & mesh upper. The MX177 features a form-fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure utilizing Carbitex tongue panels for reduced friction lace adjustment. Closure: Side mounted L6 BOA Push/Pull lacing system.

MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last and slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Competition real rubber sole with extended protection and ground stability. Upper: Clarino Microfiber & mesh upper. The MX219 features a form-fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure. Closure: Side mounted L6 BOA Push/Pull lacing system with power strap in the forefoot.

MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last and slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Competition real rubber sole with extended protection and ground stability. Upper: Clarino Microfiber & mesh upper. The MX219 features a form-fitting and durable microfiber and mesh upper with a comfortable and secure BOA closure. Closure: Side mounted L6 BOA Push/Pull lacing system with power strap in the forefoot.

The MX242 is a culmination of all of our experience, advanced materials, and shoe making techniques to make a shoe that offers the best-fitting solution for hard-to-fit foot types. Made with a heat moldable heel counter and a uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfort. MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last, and with slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Competition real rubber sole with extended protection and ground stability. Upper: Helcor Abrasion resistant leather, Ecco Fullgrain leather, and Nufoam lining with Carbon fiber support panels which help to maintain a secure fit while adding foot stability. The Helcor abrasion-resistant leather is specifically designed to be extremely durable against rubbing, scrapes, and scuffing. The upper is segmented into 6 independent zones for the most flexible fit to accommodate narrow or wide feet as well as high-instep and low-instep feet. The moldable heel counter doubles the heel hold for a secure fit. Closure: BOA Fit System Side mounted Li2 Push/Pull dial with releasable guides.

The MX242 is a culmination of all of our experience, advanced materials, and shoe-making techniques to make a shoe that offers the best fitting solution for hard-to-fit foot types. Made with a heat moldable heel counter and a uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfort. MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last and with slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Competition real rubber sole with extended protection and ground stability. Upper: Helcor Abrasion resistant leather, Ecco Fullgrain leather, and Nufoam lining with Carbon fiber support panels which help to maintain a secure fit while adding foot stability. The Helcor abrasion-resistant leather is specifically designed to be extremely durable against rubbing, scrapes, and scuffing. The upper is segmented into 6 independent zones for the most flexible fit to accommodate narrow or wide feet as well as high-instep and low-instep feet. The moldable heel counter doubles the heel hold for a secure fit. Closure: BOA Fit System Side mounted Li2 Push/Pull dial with releasable guides.

The Cadet W combines a supple, breathable Synchwire upper with a stout carbon fiber reinforced plate for pedaling efficiency, plus a supportive footbed with Aegis anti-microbial treatment for optimal comfort and fit. The single BOA L6 dial offers micro-adjustable tuning in 1mm increments, and combined with the adjustable forefoot strap, cradles your foot securely. This shoe is a great choice for riders looking for inspired performance, lasting comfort, and value. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Carbon fiber reinforced outsole with universal cleat mount (2- or 3-bolt) - Dual-injected TPU toe and heel pad Product weight: - 250 grams (Size 39)

Giro's Reveille is primed to take on day tours and road-to-nowhere excursions with ease. Sturdy nylon outsoles provide two-bolt cleat compatibility and optimum pedaling stiffness, while the replaceable walking pads add off-bike traction and stability. Styling is suited to the spirit of the modern cyclo-explorer, with two-strap uppers and ratcheting buckles for snug, secure fit and easy adjustment.

Giro's Solara Shoes offer the pedaling efficiency, support and comfort to take your road rides to the next level. They boast DuPont Zytel nylon soles for excellent power transfer and they're built on the same last as Giro's most expensive footwear to provide top ergonomics and comfort. Complementing the sweet women's fit and feel are microfiber uppers, EVA-padded, antimicrobial footbeds, padded heels and split tongues. You'll also love the double hook-and-loop straps plus ratcheting buckle closures that let you dial in the perfect fit. And there are walking tabs on the heels and toes for traction and protection.

The Stylus features our premium Synchwire single-layer upper that conforms to the foot and provides phenomenal structural support and ventilation. Three compression-molded Velcro straps provide tried and true tightening to create a comfortable, supportive fit. Our injection-molded nylon and glass fiber outsole, with over-molded heel and toe pads plus a universal 3/2 cleat bolt pattern that give you the power and versatility you need to get the most out of every ride. Upper: - Synchwire one-piece composite upper - Laser-cut venting - Three compression-molded Velcro straps - Reflective rear tab logos and graphics Outsole: - Injection-molded nylon and glass fiber outsole - Universal cleat mount (2- or 3-bolt) - Over-molded TPU toe and heel pads Footbed: - Die-cut EVA insole Weight: - 272 grams (size 42)

ALL TERRAIN, ALL THE TIME. Throw on your Shuttles, grab your bike and go rip some Saturday morning laps on the local singletrack. Wear them to the shop, go hit the dirt jumps after work and then get ready to meet your buddies for a cold one. The all-new Shuttle Flat shoe is designed to be as versatile and ready for anything as you are. Featuring an ultra-durable dual-density rubber cup sole with exclusive GRIPR rubber compound in the pedal contact area and a super-cushy internal EVA midsole, the Shuttle Flat is guaranteed to become your go-to shoe. FEATURES - Long-lasting, dual-density rubber cup sole - Exclusive GRIPR rubber section in the pedal contact area for extra-secure traction - TPU outer film covering with laser perforation for better foot climate and quick drying - Injection-molded TPU toe guard applied with an extra heavy stitch for durable security - Reflective laces with a stretch mesh lace pocket on the tongue top - Weight: 450g (size 45)

Flat Pedal Mountain Bike Shoes with an Impact-Resistant Toe Box The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage and a quick-drying synthetic upper. Cushioned and water-resistant, they offer comfort for full days on the bike. Stealth S1 rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider. - Lace closure - Fast-drying synthetic upper - OrthoLite sockliner - Molded EVA midsole - Impact-resistant urethane toe box - Stealth S1 Dotty rubber outsole - Imported

The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. - Lace closure - Quick-dry synthetic upper - Impact-resistant PORON toe box - OrthoLite sockliner - EVA midsole - Stealth S1 Dotty rubber outsole - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester

Made for endless adventures. Whatever the journey, Aertis is there to make it easier and better. The comfort of a premium suede construction meets the firmer technology that offers lateral support. The nylon sole with a replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. - Ultra-lightweight Politex membrane construction eliminates foot fatigue - Anatomical heel construction provides stabilization and control without the extra weight - Integrated impact protectors deliver protection without any burden on the toes - Firmor lateral support delivers all the stability the rider needs - Dyneema dialing system is crafted from high-density resin - MTB Nylon Sole is designed for the trails - Rubber inserts on the sole offer unbeatable stability on the toughest terrains - Sole inserts are engineered for durability

Experience ultimate cold-weather protection with PrimaLoft insulation, ensuring warmth without extra weight. Enjoy all the stabilization and control with anatomical heel construction and Millennium Fit, designed for both sneakerheads and casual wearers. The YKK Zip closure provides reliable and smooth operation, while the X2NC sole with stiffness 7 and grip sole insert deliver peak performance and enhanced control. Reinforced toes and heels guarantee durability, making it unmistakably Sidi. -PrimaLoft insulation for ultimate cold weather protection -Quicklace system for pressure-free and fast closure -YKK zip closure delivers reliable and smooth operation -Reflective inserts shine at night for safety -Winter-proof design to maintain thermal balance -X2NC Sole for peak performance and stability -Designed for durability with a protected toe design

Enhance your gravel riding with Asper, designed for every trail adventure. Velcro straps ensure quick closure and a perfect fit for a smooth pedal stroke. The new fit provides exceptional comfort, and the durable, scratch-resistant upper withstands tough rides. With a stiffness of 5, the sole allows natural foot movement and comfortable walking on mixed terrain, while offering optimal grip for pedal stability. -Structured microfiber upper is comfortable and durable -Integrated impact protectors on toes, heel, and side to keep you protected in any terrain -The Unum Ergo Feel anatomical upper is designed to be one with the foot -Seamless heel counter stabilizes the foot for a safe and comfortable ride -Millenium fit technology combines comfort and stabilization -Stable closure strap maintains a stable fit -A nylon plus glass fiber sole has a minimal stiffness level to keep you comfortable while riding and throughout the day -Features inserts designed to provide traction -The Ergo-feel sole design maintains the foot's natural shape in every motion

The Asper Laces shoe is crafted for nature enthusiasts and those seeking relaxed gravel rides. Its easy lace closure provides a quick and casual fit, perfect for enjoying leisurely rides through natural landscapes. The new shape offers exceptional comfort, tailored for today's riding style. The durable, scratch-resistant upper ensures longevity, while the sole allows for natural foot movement and enhances comfort on mixed terrain. Additionally, the sole provides optimal grip for stable pedaling, enabling you to effortlessly explore serene gravel paths. -Structured microfiber upper is comfortable and durable so that the focus is on spending a great day -Integrated impact protectors on toes, heel and side make this shoe tough on every terrain -Unum ergo feel anatomical upper keeps the shoe one with the foot -Millenium fit technology combines comfort and stabilization -Features a lace closure -A nylon plus glass fiber sole has a minimal stiffness level to keep you comfortable while riding and throughout the day -The Ergo-feel sole design maintains the foot's natural shape in every motion

Atomus excels on technical trails with its in-house developed Materiis sole compound, inspired by Sidi's 60 years of experience in controlling the most demanding environments like motocross. Built to withstand tough terrain and perform in any condition, Atomus meets the extreme demands of motocross, ensuring durability during jumps, braking, and all-terrain maneuvers. With reinforced toe protection and a durable tread, Atomus delivers unmatched performance and reliability. - Ripstop fabric construction, premium materials designed for the most technical trails - Structured ventilation engineered to cool the body and maintain performance - Impact absorption sole structure for jump landing performance - Firmor lateral support technology stabilized in every trail

The perfect shoe for enduro and downhill, the Sidi Dimaro Trail is adaptable for flat or SPD pedals. Offering high performance during a race with great pedal grip and control, with the flexibility and comfort of a trail hiking shoe. -The closure system is simple and fast, the laces allow to adjust the closure while the hook-and-loop closure keeps the laces blocked and offers extra protection from debris -The heel is equipped with a collar made of elastic material that prevents dust and debris entry -The Vibram rubber sole is stiff and smooth, with the perfect balance between stability and flexibility required for gravity riding -The sole is designed for flat and SPD pedals, with an easily removable insert

Sidi Ergo 6 is the ultimate road cycling shoe. With Firmor lateral technology, the foot is stabilized even during the most intense performances, delivering a feeling of total control. The shoes are engineered to adapt to the foot with its Unum ergonomic shape upper for a premium comfort feeling. A full carbon sole, with a stiffness level of 11, it features an increased range of cleat adaptability with 75mm connection sections for personalized fitting. -Premium perfection upper with engineered ventilation and integrated bumpers -Seamless heel counter provides stabilization and control without the extra weight -Integrated Firmor lateral structures provide impact protection where needed -Millenium Fit technology combines comfort and stabilization -Dials system connected to Firmor contours the whole foot for a personalized fit -Unum Ergo Anatomical Tongue adapts to the foot for greater comfort with every motion -R2FC full carbon sole with stiffness a high stiffness level of 11 is light, aerodynamic, ergonomic and designed to transfer power -Individual pedal positioning features a 75mm plate with 15mm extension to find the perfect spot

Sidi Ergo 6 featuring Firmor lateral technology, the foot is stabilized even during the most intense performances, delivering a feeling of total control. The shoes are engineered to adapt to the foot with its UNUN ergonomic shape upper for a premium comfort feeling. Weighing just 29,81 grams, with 1.2 mm high-tech engineered microfiber, Ergo 6 is there to last over time. Full Carbon sole, stiffness 11, it features an increased range of cleat adaptability with 75mm connection sections for personalized fitting. - Premium perfection upper with engineered ventilation and integrated bumpers - Seamless heel counter with Firmor lateral structures and millennium fit - Dials system connected to firmor with unum ergo anatomical tongue and individual pedals positioning - R2FC full carbon sole with stiffness 11 and replaceable parts

The Sidi Fast 2 features a minimalist look with a focus on rigidity, softness, and flexibility. This fast and efficient shoe with tested strength and grip is built for the most demanding rides. Easy adjustment and a clean design offer convenience so you can get out and ride. -Premium microfiber material is plush and comfortable with anatomical heel construction -Anatomical heel construction provides more stability for the heel -High-density resin dialing system with Dyneema for a personalized fit -Aerolite carbon plus nylon sole with a stiffness level of 5 combines ergonomics with power transfer -Sole inserts are engineered for durability

A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use -The Aerolite sole is designed to maximize aerodynamics and power transmission -The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort -The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike

Designed for everyone, whether racing or relaxing on the hills, Genius is a chassis for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -Microfiber upper construction offers superior comfort -Sidi heel counter maintains the foot position so that it's always stabilized -Dyneema dials system plus instep closure allows for a personalized fit -Carbon composite sole with a stiffness 6 level optimized for performance and comfort -Sole inserts are engineered for durability

The known comfort of Genius meets a knitted hyper-vented nylon construction. Designed to maintain its shape and structure, the foot is well-stabilized during rides while staying fresh on the warmest days. A carbon/nylon composite sole stiffness 6, Sidi's unique instep closure, and Dyneema high density dials complete the model for a comfortable premium ride experience. -Premium dual layer instruction features one layer for ventilation and a second for durability for a shoe that is both fresh and resistant feeling on the bike -Engineered ventilated upper allows for direct airflow to the foot for greater cooling -Sidi heel counter keeps the foot stabilized -Dyneema dialing system is crafted from high density resin -The carbon composite sole features a stiffness level of 6, combining performance and greater comfort -Sole inserts engineered for durability

The shoe that offers the best for everyone: whether racing or on a casual ride, the Sidi Genius 10 Mega is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

The shoe that offers the best for everyone. Whether racing or a casual ride, the Sidi Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad

The shoe that offers the best for everyone: whether racing or a casual ride, Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, the Sidi Genius 10 is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort -The Soft Instep Closure System is a wide, anatomically curved strap combined with a Soft, thermo-formed EVA pad that distributes pressure evenly over The Instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center The EVA pad over a high or low Instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, SIDI cycling shoes include a user replaceable polyurethane heel pad -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

Designed for everyone, whether racing or relaxing on the hills, Genius is a chassis for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The microfiber upper construction provides a comfortable feeling in the shoe -Sidi heel counter keeps the foot stabilized -Dyneema Dial System Plus Instep Closure provides a customizable and stable fit -Carbon Composite Sole has a stiffness level of 6, combining performance with enhanced comfort -Sole inserts are engineered for durability

The shoe that combines the best for everyone: whether racing or a casual ride, Genius is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. - For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad - Improved all new proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments - Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable - Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity - The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area - The Soft Instep Closure System is adjustable from both sides, to perfectly center the eva pad over a high or low instep - The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up - The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use

Experience the pinnacle of performance with the new Gore-Tex EPE Membrane with Ripstop, offering water resistance, scratch protection, and a flexible fit. Anatomical heel construction and Millennium Fit deliver all the stabilization and control without extra weight, ensuring superior comfort for everyone. The Quicklace closure enhances safety and speed, while the X2NC sole with stiffness 5 and grip sole inserts provide unparalleled control and comfort. Reinforced toes and heels ensure lasting durability, making it unmistakably Sidi. -Gore-Tex EPE membrane is environmentally friendly and 100% PFC-free -Outer features ripstop material to keep water out with a flexible fit -Reflective inserts shine at night for safer cycling -Quicklace closure is easy to use and is pressure-free -Winter-proof design to maintain thermal balance -X2NC sole allows you to keep a great level of control -Designed for durability with a protected toe design

The Sidi Heimx cycling boot provides weather resistance and durability with the new Gore-Tex EPE Membrane with Ripstop, providing a flexible and scratch-resistant fit. Enjoy ultimate stabilization and control with anatomical heel construction and Firmor lateral support technology, all without the extra weight. The Millennium Fit ensures comfort and stabilization for everyone, while high-density Dyneema dials offer a personalized fit. The X2NC sole with stiffness 7 delivers the perfect balance of riding and comfort, complemented by grip sole inserts for enhanced control. Reinforcements on the toes and heel ensure lasting durability, making it unmistakably Sidi. -Gore-Tex EPE membrane is environmentally friendly and 100% PFC-free -Outer features ripstop material to keep water out with a flexible fit -Anatomical heel design for sustained pedaling and comfort -High-density dial system with Dyneema is designed to last while maintaining a secure fit -Firmor lateral technology maintains the highest level of lateral stability -Winter-proof design to maintain thermal balance -X2NC sole allows you to keep a great level of control -Designed for durability with a reinforced toe

A minimalist look for a concentrate of rigidity, softness, and flexibility. The fast and efficient shoe with tested strength and grip for the most demanding actions. Easy adjustment and a clean design make it even easier and more immediate to use. Developed in partnership with Sartoria Ciclistica, these shoes embody the spirit of cycling as a recreative activity, perfectly paired with a cup of coffee. -Anatomical heel construction is contoured for better stability -Dyneema dialing system is crafted from high-density resin for a customizable fit -Aerolite carbon plus nylon with sole with a stiffness level of optimized for ergonomics with power transfer -Sole inserts engineered for durability

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

Whatever the journey, the Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets the Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support The Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

Whatever the journey, Aertis is there to make it easier and better. The comfort of a premium suede construction meets the Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary SIDI Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

Dedicated to the strongest conformations, the Sidi Dragon 5 Mega guarantees a perfect feeling of comfort even for those with a wider sole or high instep, ensuring comfort, rigidity and performance. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole uses replaceable tread blocks in the heel and the toe - The Ground SRS treads and MTB Plate are easily removable and replaceable