Misc.

The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.

Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.

The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.

Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty

The Race and Ergo Ultra pads allow riders to tune their setups for a snug fit. - New foam that resists being crushed for longer periods of time - Improved surface durability - Superior grip with a molded-in textured surface - Compatible with both the Ergo and Race armrest kits - Dimensions: Race (92.9mm x 887.5mm) or Ergo (108.4mm x 87.5mm) - Compatibility: Race / Ergo - Weight: 5mm: 21g / 10mm: 37g

RockShox Lever Assemblies

Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit

TT Brake Lever Hardware Kit

• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included

Replace old brake barrel adjusters with a fresh pair of Problem Solvers' 10mm Brake Barrel Adjuster. Designed for use with standard brake cables.

- Retrofits all Absolute damping forks (sold by fork year/model) - Separate thumb-operated lock and release buttons - Die-cast alloy body with forged alloy lever

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Remote rebuild kits and subcomponents for Reverb and Reverb Stealth Posts.

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

Replacement derailleur hanger screws for Syntace X-12 system.

Disc Brake Adaptors - Includes Stainless Bolts

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Thermalite material molded into a guard that will protect your Sumo sprocket. Super-strong Chromoly bolts keep this thick guard in place. - Material: Stolen's Thermalite (Nylon w/Long Glass Fiber) - Thickness: 7.75mm - Sizes: Fits 25 tooth Sumo III - Colors: Black - Weight: 2.5 oz

The OSPW X System for Shimano XT/XTR 1x12 reduces friction by 35-40% compared to stock pulley configurations. The lightweight, custom-molded carbon fiber cage ensures durability. This design allows the use of the same length chain as stock pulleys. The 14-tooth upper and 18-tooth lower pulley profiles ensure stable chain retention while reducing drag. The OSPW X System is developed, designed, and handbuilt in Denmark—and proven globally. Only compatible with 1X specific derailleurs. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/oil: CeramicSpeed Pulley Oil - Compatibility: Shimano XTR M9100-SGS, Shimano XTR M9100-GS, Shimano XT M8100-SGS and SLX M-7100 derailleurs - Cassette Compatibility: Up to a 10-51 tooth range - Spring Tension Settings: 2 spring tension settings - Speed: 12-speed - Discipline: Off-Road In the box: - Complete OSPW System for Shimano XT/XTR 1x12 - CeramicSpeed Pulley Oil, 15 ml - Sticker Sheet

Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

- Truvativ, Crank arm bolt, M12, Cromoly, Self-extracting for Howitzer, Bag of 2

Down Under Mounted under your bar, the redesigned Turbine R 1x Seatpost Lever may just become your thumb's new best friend. This strong, lightweight lever is a real smooth operator that is a breeze to actuate. Optimized for use with our Turbine R dropper but will play nice with other posts. Strong For Any Size This lever is made from forged and machined 6061-T6 Alloy for lightweight durability. Comes with all clamp options, including Matchmaker and I-Spec EV. Thumbs up To show your thumb a good time, this lever features a textured non-slip pad and moves on an oversized sealed bearing pivot for pure silky performance. Rainbow Drop Available in black and 5 other vibrant colors, the Turbine R 1x lever will work with other cable-operated posts needing 10mm or less of cable pull. - Compatible with Matchmaker - Includes cable and housing - Mechanical lever actuation - Weight: 33g

A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)

Needle Equivalent to SM-BH59.

- Enhanced aerobar position performance - Long term pressure distribution - Anti-slip surface Upgrade your Profile Design aerobars to maximize your performance and enhance comfort while in the aero position. The Ergon CRT Arm Pads for Profile Design help to maintain the perfect aero position for many hours during time trials and triathlons. Made from high end OrthoCell foam, the pads prevent pressure discomforts and noticeably dampen road vibrations. The surface is slip-resistant to help you fully focus on your race!

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).