Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Derailleurs

Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Shimano 105 5800 Rear Derailleur Pulley Set
$11.00
- Upper pulley has larger teeth for increased chain control
Microshift M26 Rear Derailleur
$14.99
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Campagnolo EPS Front Derailleur Nut & Washer
$17.90
- EPS specific front derailleur nut and washer
Shimano Tourney TX-800 Rear Derailleur
$19.99
Shimano Tourney TX is a basic 8-speed rear derailleur for entry-level sport bikes and riders. Enjoy durable, trouble free, and stable performance. - Maximum cog size: 34t - Total capacity: 43t
SRAM X3 7-/8-Speed Rear Derailleur
$22.00
SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
Microshift R9 Front Derailleur
$24.99
Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body
Microshift R10 Front Derailleur
$27.99 - $38.99
R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body
Microshift R539 Front Derailleur
$27.99
Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings
Shimano SLX 2x11 Front Derailleur
$29.99
- Series: SLX - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 145.6g
Shimano SLX Side Swing Front Derailleur
$29.99
- Enhanced Stability, Maneuverability And Shifting Efficiency - New Side Swing Design For Large Wheel Bikes - Efficient Cable Routing For Light Shift Operation - Sophisticated Chain Guide For 2X11-Speed Fcw New Spike Construction Gears - Versatile Specification Compatible With Traditional Mounting Options - Wider Clearance For Large Wheels - Compatible With Shorter Chain Stays - 50% More Shifting Power (Outward) (Vs. Current Xt, Fd-M7020 Only) - Increased Traction Range For Long-Travel And Active Rear Suspension - Series: SLX - Swing Action: Side Swing - Top Gear Teeth: 34-38T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 136g - Clamp diameter: 34.9 w/included shims
Shimano Deore M6025 Double Front Derailleur
$38.99
Features: - Smooth shifting and less cadence shock - Close step (10T) - Efficient cable routing - OPTISLICK cable - Stable performance on suspension bikes - Shifts properly while rear suspension handles rough trails and obstacles - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - 2x10-speed
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$39.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
Shimano 105 FD-R7000 Front Derailleur
$39.99 - $42.99
The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options
Shimano Deore M6000 Triple Front Derailleur
$39.99 - $40.99
Shimano's Deore Front Derailleur delivers smooth shifting and less cadence shock along with top-notch durability. Made for triple-ring set ups, it's 10-speed compatible. You'll get stable performance, even with full suspension MTB, as it shifts properly while the rear suspension handles rough trails and obstacles. - Consistently quiet driving while rear suspension position changes - Custom plate design for single spike gear structure - Chain catcher - Close step (10T) - Efficient cable routing - OPTISLICK cable - Swing Action: side swing - Top Gear Teeth: 40-42T - Chain Line: 50 - Chain Stay Angle: 66-69
Shimano XT M8100 Side Swing Front Derailleur
$44.99 - $46.99
The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38
Campagnolo Veloce Braze-On Front Derailleur
$45.00
Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.
SRAM X5 9-Speed Rear Derailleur
$47.00
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
K-Edge Road Clamp-on Chain Catcher
$54.99
The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams
K-Edge Pro Braze-on Chain Catcher with SRM Magnet
$59.99
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Shimano Ultegra R8000 Front Derailleur
$59.99
Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams
Microshift ADVENT Rear Derailleur w/Clutch
$64.99
Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only
Shimano SLX Shadow Plus 11-Speed Rear Derailleur
$76.99
- Rider Tuned For Sharp And Silky Shifts - 20% Light Shifting Operation - New Shadow Design With Optimized Slant Angle - Optislick New Shift Cable With New Hyper Low-Friction Coating Technology - Chain Stability Improved - New Shadow Design With Optimized Slant Angle For Stable Gear Position - Efficient Shifting And Smoother Driving - Efficient Pulley Teeth Design - Increased Traction Range For Long-Travel And Active Rear Suspension - Series : SLX: SLX - Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed) - Minimum Sprocket : 11T: 34-38T - Front Difference : 10T: 48.8 - Total Capacity : 41T: 66-69 - Average Weight : 323g: 145.6g
SRAM X0 2x10 Front Derailleur (S3 Low Direct-mount, Top-pull) 38/36T
$77.00
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load. This 38/36T maximum chainring size version is the one you want if you are running a low-range double-ring setup.
Shimano Ultegra 11-Speed Rear Derailleur
$83.99 - $89.99
Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.
Campagnolo EPS Front Derailleur Stiffener
$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
K-Edge K-EDGE 1x Mountain Chain Guide
$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Shimano XTR Mechanical Front Derailleur (High Clamp)
$124.99
• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Down Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Mountain • Front Derailleur Cable Pull: Dual Pull • Front Derailleur Clamp: 31.8 (1-1/4") , 28.6 (1-1/8") , 34.9 (1-3/8") • Front Derailleur Style: Traditional • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: 31.8 (1-1/4") , 28.6 (1-1/8") , 34.9 (1-3/8") • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: 31.8 (1-1/4") , 28.6 (1-1/8") , 34.9 (1-3/8") • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth
Campagnolo Veloce Rear Derailleur (Medium-Cage)
$125.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
Campagnolo Veloce Rear Derailleur (Short-Cage)
$125.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
Shimano XTR FD-9100 Side Swing Front Derailleur
$129.99
Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter
SRAM RED eTap Ceramic Bearing Rear Derailleur Pulleys
$150.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
SRAM Force 1 Rear Derailleur
$225.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
TRP DH7 Drivetrain Kit
$299.99
DERAILLEUR TRP's new DH7 rear derailleur brings a new feature to racing. TRP R&D worked closely with Aaron Gwin and his mechanic, John Hall, to build an advanced DH derailleur. The derailleur is true G-Spec, utilizing carbon fiber for the outer parallelogram link and pulley cage; offering an adjustable Ratchet Clutch; and adding features born from competition like the Hall Lock, a B-Knuckle lock that reduces noise and increases shifting stability. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches: - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys SHIFTER TRP's new DH7 shifter is molded from carbon fiber and features TRP's linear release action for upshifting to higher gears. This unique mechanism allows the cable release lever to more closely mimic the motion of a rider's thumb, producing super-fast and super-precise shifts out of the starting gate while maintaining a tight grip on the handlebar. - Shift levers designed and located for optimum performance by Aaron Gwin - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 7 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range
SRAM RED eTap Rear Derailleur
$649.00
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
Campagnolo Super Record EPS Braze-On Front Derailleur
$735.00
Campagnolo's Super Record EPS Braze-On Front Derailleur delivers electronic precision to your front shifts. Hammer into the big ring and surge forward with a mere touch of a button, under heavy load or out of the saddle it's still as smooth as a dream. An aluminum internal cage plate and external carbon cage is powered by a servo motor to provide the incredibly quick shifting. It's versatile too, working with both standard and compact cranksets and auto-trimming to eliminate chain rub. - Drivetrain speeds: 11 - Derailleur capacity: 16T - Max ring (teeth): 55T - Double or triple: Double - Waterproof to 1 meter for 30 minutes (IP67 rated) - Weight: 127g
Page 1 of 1