Lubes/Cleaners

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

Chill Zone™ is arguably the industry's most advanced rust-busting penetrating lubricant. It simply works like magic! Before giving up on a frozen crank bolt, a rusted derailleur spring, a seized seat post, or discarding your rusted chain, give Chill Zone™ a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. A special refrigerant propellant freezes metal to as low as -50°F/-45°C. This causes contraction of the metal and creates micro-cracks in the corrosion and galvanically fused metal parts. A penetrating release agent then breaks down and flushes out the rust. With Chill Zone, most seized parts regain full functionality.

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

Shock Oil is a semi-synthetic formulation that combines the best of available oils and additives for a super suspension oil. It's fully compatible with all systems and internal components, seals and O-rings. Its viscosity stays constant as the temperature changes, so your shock feels the same whether you're roasting or freezing!

HALO® WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance by reducing friction and wear caused by abrasive contaminants, delivering long-lasting lubrication. Designed for dry and dirty conditions, this advanced formula ensures maximum chain cleanliness, making it ideal for cyclists seeking top performance. Developed in a state-of-the-art laboratory and field-tested by leading professional teams, HALO® WAX applies as a liquid and dries to a durable wax coating that is completely dry-to-the-touch, providing a clean and efficient drivetrain. Each bottle of HALO® WAX comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WAX and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

HALO® WET chain lubricant is expertly engineered to deliver unparalleled drivetrain performance and extended relubrication intervals in both clean/dry and wet conditions. Designed using advanced laboratory-developed chemistries and rigorously field-tested by top professional teams, HALO® WET ensures ultra-low friction, superior mileage, and ultimate water and rust resistance. This high-performance liquid formula is easy to apply, goes on wet, and is ready to ride immediately, providing cyclists with reliable lubrication for any weather or terrain. Each bottle of HALO® WET comes with Finish Line’s innovative patent-pending Smart Luber™. This advanced applicator delivers precise lubrication, ensuring every chain link is covered without the mess and waste of traditional methods. The Smart Luber™ revolutionizes the way lubricants are applied, saving time and eliminating waste by ensuring no link is missed, no excess is spilled, and no performance is compromised. HALO® WET and the Smart Luber™ offer cyclists an easy, efficient way to maintain optimal drivetrain performance and cleanliness.

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. Features & Benefits: - Ready to use with no water rinsing required - Safe for use on all surfaces and paint finishes - 100% readily biodegradable and non-toxic - State of the art cleaning agents remove dirt and grime - Superior rust inhibitors protect metal parts after application - Also available as a concentrate

HALO® HOT WAX chain lubricant is expertly engineered to deliver unparalleled drivetrain performance, reducing friction and wear from abrasive contaminants over extended relubrication intervals. Developed with advanced lab-tested chemistries and proven in the field by top professional teams, it provides peak performance in all riding conditions. The wax dries quickly on the chain, leaving it clean to the touch, while offering complete water and rust resistance. For convenience, HALO® HOT WAX comes in specially designed, easy-to-use bags—simply boil the bag to melt the wax pellets inside. Each reusable bag contains 600g of wax, providing enough for approximately 25 chain dips. The included Immersion Tool simplifies the chain dipping process, making it efficient and hassle-free.

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments. If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

DOT 5.1 Brake Fluid, 16 OZ Bottle. Viscosity-stable across highest range of operating temperatures.

12 gram, non-threaded CO2 cartridges compatible with the Ultraflate, Ultraflate Plus, Ultraflate Pro, and Second Wind IH. Pack of 3.

16 gram, threaded CO2 cartridges inflate narrow profile tires to high pressures, mid-sized mountain bike tires to optimal pressure, and wide MTB tires to rideable pressures. Works well for most road bikes, and also fills ATV tires. Compatible with the Ultraflate, Ultraflate Plus, Ultraflate Pro, Microflate, Air Chuck, Second Wind IH, and Second Wind MTB. Pack of 2.

Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.

Lezyne Pump Parts

Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

The Pocket Drive is an amazingly compact and lightweight bicycle hand pump featuring plenty of pumping efficiency. It's constructed from durable CNC machined aluminum and has a handle that's lightly knurled for slip-resistant operation. With its overlapping handle and integrated ABS Flex Hose, the Pocket Drive offers performance unmatched for its size. The pump is Presta and Schrader valve compatible, and it's completely rebuildable for continued use at a high level. - 140mm, 79g - 160 psi, 11 bar - CNC machined aluminum construction with compact overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes Composite Matrix frame mount

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge

Compact and super-efficient high-volume bike hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, with superior durability, minimal weight, and all of the style. The integrated ABS Flex Hose is Presta and Schrader valve compatible and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 90 PSI (6.2 BAR) of pumping power, the Grip Drive HV is excellent for all-mountain bikes and gravel bikes. Includes a lightweight Composite Matrix frame mount. - Max pressure: 90 PSI | 6.2 BAR - Small: 186mm | 119g - Medium: 231mm | 134g

350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.

Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.

Innovative 2-in-1 cycling CO2 dispenser and tubeless tire repair kit simultaneously inflates and seals tubeless tires. Machined aluminum construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug, and inflates tire for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminum canister holds the five included tire plugs and safely stores the reamer when not in use. High-quality tire plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tire to tire). Sleek, compact design fits in a pocket or straps to your bike. Note: Sealing performance may vary based on puncture size, tire size, and tire pressure. - Compact tubeless tire repair kit. - Machined aluminum storage tube doubles as a handle. - Combined tire reamer and insertion tool. - Includes five tire plugs. - Includes 2 x 20g CO2 Cartridge and Velcro Strap.

The Micro Floor Drive XL is a portable hand pump with floor pump capabilities developed to efficiently inflate fat bike tires. It features a CNC-machined aluminum construction, which keeps its weight to a minimum without sacrificing durability. An extra-large, high-volume barrel produces large amounts of air with each pump and can inflate tires up to 35 psi (2.4 bar). A long, integrated hose and a stainless steel foot peg improves pumping efficiency and reduces trailside downtime. The ABS Flip Chuck is compatible with both Presta and Schrader valves and threads into the pump’s base for optimal storage.

The Classic Floor Drive 3.5 is an elegant, classically designed bicycle floor pump with a durable, CNC-machined aluminum base and a steel barrel and piston. Designed for high-pressure applications, it features an oversized 3.5-inch gauge for increased precision and an extra-long, high-strength hose with aluminum couplers. All of this is topped off with a durable, premium paint finish and a varnished wood handle. ABS-1 Pro equipped. SPECS: - WEIGHT: 1.7kg / 3.75lbs - MAX: 220psi | 15bar - SIZE: 15 x 20 x 63.5 cm / 5.9 x 7.9 x 25 in